Double servo full hydraulic high-speed angle iron blanking machine
- product brand:Wuxi huaxinda
- Numéro de stand：W5B01
- product specification:HXD-JGSG-30-50
- product category:Ventilation Plants-Miscellaneous Components for ventilation plants-
- product introduction:1. Driven by double servo motors, the two motors have no intermittent alternate feeding and no tailing, and the efficiency is improved by 30%.
2. Double ball screw drive ensures more accurate conveying and faster speed.
3: The whole machine is equipped with a material rack that can bear 5.5 tons, which realizes easy feeding and does not waste waiting time.
3. Straight-line square rail integrated combination, CNC finishing of bed table to ensure higher equipment accuracy.
4. Fully hydraulic cylinder clamping manipulator, the two manipulators are alternately complementary and interchangeable, which ensures reliable clamping and sensitive response without slipping. 5. Independent hydraulic cylinder pressing structure, punching each hole against the corner of angle steel width, so as to realize the finer size of the hole in the angle steel width direction.
Indeed, it is more reliable to press the material when realizing the feeding back.
6. Ultra-efficient and high-speed air-cooled unit, equipped with 400-liter volume radiating oil tank.
7. The punching die is greatly innovated, which solves the problem that it is more convenient to replace the clamping fixture of the horn iron, and it is faster and more labor-saving to replace the punching needle. The automatic chamfering structure can adjust the chamfering size, and the fillet/right angle is interchangeable.
8. Production efficiency: every 6 meters including feeding for 60 seconds (the order length is 1000 ㎜ per piece when the distance between holes is 120 ㎜, excluding.
Automatic chamfering time) The running speed of the system is adjustable. Automatic alarm in case of failure, order storage function, etc.
9: The positive and negative error of hole spacing shall not exceed 2mm.
