Eight-station four-servo high-speed angle iron blanking machine
- product brand:Wuxi huaxinda
- Numéro de stand：W5B01
- product specification:HXD-JGSSG-30-50
- product category:Ventilation Plants-Miscellaneous Components for ventilation plants-
- product introduction:1. Two machines mirror one person to operate the machine, which is convenient and efficient. Orders are automatically arranged and produced.
2. Hydraulic system: double motor and double pump hydraulic system. Numerical control: driven by two groups of double servo motors, the two motors have no intermittent alternating complementary feeding and no tailing, and the efficiency is improved by 90%.
3. Two groups of double ball screw drives ensure more accurate conveying and faster speed.
4. The whole machine is equipped with a material rack that can bear 5.5 tons, which realizes easy feeding and does not waste waiting time.
5. The straight-line square rail is integrated, and the machine table is CNC finished to ensure higher equipment precision.
6. The manipulator clamped by the full hydraulic cylinder. The two manipulators are complementary and interchangeable in turn, which ensures reliable clamping and sensitive response without slipping.
7. Independent hydraulic cylinder pressing structure presses each hole against the corner of the angle steel width, so that the size of the hole in the angle steel width direction is more accurate and the pressing is more reliable when feeding back.
8. Ultra-efficient and high-speed air-cooled unit, equipped with a 400-liter volume radiating oil tank.
7. The punching die is greatly innovated. It is more convenient to replace the clamping fixture of horn iron 3, 4 and 5, and it is faster and more labor-saving to replace the punching needle. The automatic chamfering structure can adjust the chamfering size, and the fillet/right angle can be interchanged.
8. Production efficiency: The operating speed of the system can be adjusted every 6 meters including feeding for 65 seconds (under the condition that the distance between large and small holes is 120㎜, the order length is 1000㎜ for each two pieces, excluding automatic chamfering time). Automatic alarm in case of failure, order storage function, etc.
9. The positive and negative error of hole spacing shall not exceed 1 mm.
